LCRF

Privacy preferences

Choose optional purposes independently. You can change or withdraw your choice at any time from the footer.

Strictly necessary

Required for security, session functions and storing your privacy choice.

Always active
Preferences

Remembers optional display or language settings when these features are enabled.

Analytics

Uses first-party visitor and session identifiers to measure pages, referrals and inquiry interactions.

Marketing

Allows marketing measurement or third-party advertising technologies if they are introduced in the future.

ENEnglishDEDeutschFRFrançaisRUРусскийESEspañolZH中文JA日本語PTPortuguêsITItalianoKO한국어ARالعربيةTRTürkçe
Get Quote
RF & Microwave Components and SystemsMenu
lcrf.com
Get Quote

Wilkinson Power Dividers

Wilkinson power dividers provide equal, in-phase RF outputs with output-port isolation. Compare split loss, excess loss, balance, return loss and real power conditions.

Project inquiryDownload product list
Wilkinson Power Dividers
Power Combining NetworkPower combining networks combine RF energy from amplifier branches or divide one signal into parallel paths while preserving ratio, phase, impedance and isolation in amplifier platforms, phased arrays and RF test systems.

Articles

RF power divider and coupler hardware connected in a microwave measurement setup
RF Power Distribution EngineeringHow to Select RF Power Dividers, Combiners and Directional Couplers

A practical method for choosing RF dividers, combiners and directional couplers from signal-flow purpose, topology, frequency range, balance, isolation, directivity, match and real power conditions.

FAQ

When should Wilkinson, resistive, 90-degree or 180-degree RF networks be used?

Choose by the required phase relationship, bandwidth, loss and isolation rather than by port count alone. A Wilkinson network is the usual starting point for equal 0-degree split or combine paths with useful output isolation and low excess loss over its designed band.

How do split loss and excess insertion loss differ in an RF power divider?

Split loss is the unavoidable 10 log10(N) dB reduction when input power is divided among N equal outputs; excess loss is additional real-device loss beyond that ideal split.

Can an RF power divider be used as a combiner?

Often yes, but only when the divider is reciprocal, the manufacturer permits reverse use, and the input signals meet the required amplitude, phase and power conditions. A 0-degree divider used in reverse produces the vector sum at the common port; it does not simply add two headline power ratings.

What is the difference between an RF power divider and a directional coupler?

A divider creates two or more controlled output paths, while a directional coupler samples a defined fraction of a travelling wave and preserves a main through path.

Engineering inquiry

Share your RF requirement

Share the product, operating requirements and project context. Our engineering team will route your request to the right specialist.

AttachmentsAttach drawings, BOMs, specifications or test files. Up to 5 files, 10 MB each and 25 MB total.
or drag and dropPDF, DOCX, XLSX, CSV, TXT, JPG, PNG, S1P and S2P
Typically reviewed within one business dayProject information is handled confidentially

Wilkinson RF power dividers

A Wilkinson divider is a matched transmission-line network that creates equal, in-phase RF output paths while an isolation resistor limits interaction between the output ports. It divides power; it does not divide frequency. The same reciprocal network may be used for combining only when the source relationship and the manufacturer's power conditions support that direction.

Compare usable frequency range, port count, ideal split loss, excess insertion loss, amplitude and phase balance, output isolation, return loss and temperature behavior at the same reference planes. Average and peak input ratings alone are not enough for a combiner decision.

For combining, define source coherence, amplitude and phase error, failed-source behavior, load VSWR and the power that can be dissipated in the isolation resistor. Acceptance should terminate every unused port and record full-band S-parameters plus representative-power thermal behavior.